What is the Best Sliding Compound Miter Saw? — Reviews of Models with Best Value For Money (2022)

Makita XSL06PT tried on wood

If you buy something through our posts, we may get a small commission. Read more here.

A compound sliding miter saw is one of the most important power tools every woodworker should own. However, purchasing a poor-quality model can expose you to injuries and create unnecessary and inaccurate cuts. To avoid this, our experts are here to help you determine the best sliding compound miter saws you need in your woodshop. Table could not be displayed.

Reviews of the Best Sliding Compound Miter Saws


This Dewalt saw is a quiet, super-fast cutting saw with its 12-inch blade. With a compact build at 56 pounds, it is capable of creating miter cuts when you rotate its base, and bevel angle cuts by tilting the blade.

The saw also offers an excellent sliding action. You can have a broader cut with its 50° left and 60° right coverage and crown molding up to 7.5 inches. The powerful 15 amp motor can drive the blade up to 3,800 RPM. 2 x 14 lumber is no match for the saw, and it can create cuts at 90° and 2 x 12 inches at 45°. These capabilities easily make the Dewalt DWS799 a reliable companion in your workshop.

What We Like

What We Don’t Like

2. Makita XSL06PT

A premium product demands a high price tag. As consumers, we expect the performance to mirror the expensive cost. The Makita XSL06PT allows users to make faster and smoother cuts thanks to the brushless BL motor that can power the blade at 4400 RPM.

As a battery-powered model, the XSL06PT runs on dual LXT batteries that are more efficient and bring a longer runtime, more speed and explosive power. The Makita sliding compound miter saw has smart automatic speed change technology that will adjust the torque and speed according to the material.

What We Like

What We Don’t Like

3. Delta Shopmaster S26-272L

The versatility offered by the Delta Shopmaster S26-272L is unbeatable for the price.The sliding compound miter saw allows for crosscuts, miter cuts and bevel cuts at varying degrees. Then there is an electric brake installed that will halt the blade in just a few seconds during switch release.

Most people wouldn’t associate a sliding compound miter saw with the word “portable”, but the S26-272L is one that is relatively lightweight compared to other models and can be transported from site to site.

Delta ensures the quality of the Shopmaster S26-272L by including a 3-year warranty with your purchase.

What We Like

What We Don’t Like

4. Bosch GCM12SD

For those who want wider crosscuts, the Bosch GCM12SD is for you. The saw is heavy, weighing 88 pound, but that’s a given with a 15-amp motor that can run at 3,800 RPM. You can find the bevel locks on the front, and the miter ranges are average.

Since the bevel control comes in front, it’s easy and safe to adjust. You don’t have to go behind the saw when changing it, which can really cut into your work time.

For max control, you will find a push-button miter detent override. However, it lacks a guide, making it not the best choice for professional use.

(For more powerful products, you can also check our review of top-tier 10-inch miter saws here

What We Like

What We Don’t Like

5. DELTA 26-2241

The saw runs on a 15-amp motor at an impressive 4000 RPM with a safety blade brake. The bevel ranges up to 47° in either direction. As for the miters, you get both left and right. The Delta 26-2241 Sliding Miter Saw gives up to 50 degrees left and 60 degrees right bevel angles with a steel detent plate for durability.

The saw’s aluminum frame design makes it easy to move around. It has seven predetermined positions for bevel cuts with a lever making it convenient to move between stops. The shadow guide improves on the saw precision and the trigger is designed to be comfortable for both left-handers and right-handers.

What We Like

What We Don’t Like


This 10-inch miter saw has a 60-tooth blade running on a powerful motor. The in-built laser guide will lay out a path for your blade, which gives a clean result. The dust port has been improved with up to 80% efficiency. 

To keep you safe, Makita LS1019L has included a soft start feature and an electric brake.
You can lock the slide for miter angles easily with one-touch in this power tool. The front knob makes it easy to adjust the bevel to your desired angle while being portable for you to move around easily.

What We Like

What We Don’t Like



This is a 20-pound cordless miter saw with steel castings and handles on the sides for easy use. Craftsman has a 20-V brushless motor running at 3800 revolutions per minute. It also tilts up to 47 degrees in both directions for a miter cut and has additional nine predetermined positions, which makes this a multipurpose product.

The saw also includes a dust bag to keep your workplace clean. The long-lasting 40-tooth carbide-tipped blade can deliver fine cuts with an 8-inch slide capacity and create crosscuts at 90°. The gauge is also in a convenient position for you to monitor the air pressure easily.

(For other miter saw brands, you can also check the best Ryobi miter saw that we reviewed here)

What We Like

What We Don’t Like

Sliding Compound Miter Saw Buyer’s Guide

Our experts have curated this guide to help you know what to look out for in the best sliding compound miter saws in the market.

Motor Power

If you go with a saw having a weak motor, not only the results can be undesirable. The saw could get damaged if you keep pushing it beyond the limits. Our team suggests you go for a saw with at least 15 amps and goes at 3,500 RPM or higher. It is the standard motor power for normal woodworking jobs and the perfect miter saw for beginners like you.

Corded or Cordless Sliding Compound Miter Saw

This is a compromise between convenience and power. You can use a cordless saw when a power source isn’t close enough. The clause is that you can’t use the saw heavily or for too long without the need to charge up again. Batteries are also an additional cost. It’s the opposite with corded ones. You get better power when you choose corded options.

Cutting Capacity

The cut capacity has to do with the range of functions you want to carry out with your saw. The motor power of your saw is relevant here. Check the miter stops and lock to make sure the saw locks into position. Check if it’s a single or double bevel compound type. A single bevel tilts one way—the double tilts in either.


When getting the right blade for your tool, you should check the size and arbor. You see the common sizes in the market range from 8, 10, 12, up to 15 inch blade.

For large and complicated jobs, larger blades are preferable as they create deeper and longer cuts. The 10-12 inches blades are enough for standard woodworking jobs. Carbide blade, on the other hand, is a preferred type by our experts because of the versatility it offers.

(If you are looking for 12-inch blade options, we also reviewed the top 12-inch miter saws here)

Dust Collection System

The dust generated while cutting can affect your health and make your workspace unconducive. Some saws come with an in-built dust collector that reduces the time you spend cleaning and gives you a safer work environment. With a dust collecting system, you can have a tidier setup, and less cleaning work in the process.

Safety Features

Saws could cause physical harm with the slightest whiff of carelessness [1] and lack of woodworking safety practice. Our experts urge you to find a miter saw with safety features. The blade guard, for instance, keeps your fingers away from the blade. The splitter, riving knife, and anti-kickback pawls, on the other hand, prevent kickbacks.

Some new releases have a proximity sensor that stops the tool when a body part approaches a running blade. Ensure the saw you buy has all these safety features in place to avoid workplace injury.

Advantages of Using a Sliding Compound Miter Saw

You can enjoy different advantages when using this type of miter saw. It lets you cut broader materials and provides flexibility to your cutting projects. Moreover, using this power tool can save time as you don’t have to change saws to get the work done.

The sliding miters also offer more versatility and gives you an economically wise decision. With a wide range of cutting jobs it provides, it reduces the need for other types of saws, which is why our team has a few of these in the workshop.

How to Use a Sliding Compound Miter Saw

Using this type of miter saw is not as challenging as most of us would think. First, you need to clamp the board to the fence and lower the blade to the board before you squeeze the trigger.

After which, let the blade reach its top speed before feeding the board steadily through the blade. In this step, it is important to gradually pull the head down to ensure that it is properly cutting through the workpiece. Keep the head down as you push the blade all the way through the work.

When cutting is done, continue to hold the head down and slowly release the trigger. At this point, the head will finally reach a complete stop where you can bring the head back to its original position. It is an indication that you already complete cutting with a compound miter saw.


Which sliding compound Mitre saw is the best?

The best sliding compound miter saw is the DEWALT (DWS779). It has the perfect blend of compactness, speed, versatility, and precision. It is also a very durable saw to use and can handle all the tough jobs thanks to the 15-amp motor.

Are sliding miter saws worth it?

Sliding miter saws are worth it because they can perform a wide range of cutting functions and give you accurate cuts. Aside from that, when comparing sliding miter saws to non-sliding miter saws, a sliding miter saw is a complete package because it provides various types of cut, especially when confronted with a wider board, whereas non-sliding miter saws are not suitable for cutting larger boards.

Our Top Pick for a Sliding Compound Miter Saw: DEWALT DWS779

Our top pick for the best sliding compound miter saws on the market is the Dewalt DWS779. It is a highly versatile, fast-cutting, and heavy-duty miter saw with a motor running at 3800 rpm. This power tool can cut through heavy and rigid materials while maintaining accuracy and outstanding performance and it is the go-to tool for big projects among woodworkers.

Dust and clutter is part of every woodworker’s job. However, you can keep your shop more tidy if you install one of these high-quality cyclone dust collection in your woodshop. Read next!

Robert Johnson is a woodworker who takes joy in sharing his passion for creating to the rest of the world. His brainchild, Sawinery, allowed him to do so as well as connect with other craftsmen and women. He has since built an enviable workshop for himself and an equally impressive online accomplishment: an extensive resource site serving old timers and novices alike.
Robert Johnson
Latest posts by Robert Johnson (see all)